Don’t Waste Airtime

While building your solution, it is essential to keep in mind how much airtime you consume. Airtime is the time that a single end device uses to send and receive a packet of data. The airtime of a LoRaWAN packet with a payload of 10 bytes is about 50 milliseconds when using SF7, and 1.5 seconds using SF12.

Why is it so important to keep the airtime to a minimum?

  • The more packets a gateway receives, the higher the chance that there will be a collision of the packets and that the gateway will not be able to successfully receive them. This being the case, keeping the airtime to a minimum reduces this collision risk. Fortunately, this is inherently less risky for a LoRaWAN network because this will only become a problem if the gateway receives two messages sent over the same frequency that arrive at the gateway simultaneously using the same spreading factor. 
  • An end device consumes more energy when it uses more airtime.

Note

It is important to understand that the LoRaWAN® protocol always adds at least 13 bytes of overhead to the application payload, including the device address, frame counters, Message Integrity Code, etc.  Have a look at the LoRaWAN specification if you want to see the full contents of those 13 bytes.

Last modified: Tuesday, September 27, 2022, 5:07 PM